Flying junction

A flying junction or flyover is a railway junction at which one or more diverging or converging tracks in a multiple-track route cross other tracks on the route by bridge to avoid conflict with other train movements. A more technical term is "grade-separated junction". A burrowing junction or dive-under is where the diverging line passes below the main line.

The alternative to grade separation is a level junction or flat-junction, where tracks cross at grade and conflicting routes must be protected by interlocked signals.

Contents

Complexity

Simple flying junctions may have a single track pass over or under other tracks to avoid conflict, while complex flying junctions may have an elaborate infrastructure to allow multiple routings among a variety of tracks without trains coming into conflict, in the manner of a highway stack interchange.

High-speed rail

Nearly all junctions leaving or joining high-speed railways are grade-separated. On the French TGV high-speed network, the principal junction on the LGV Sud-Est at Pasilly where the line to Dijon diverges from the line to Lyon, and the junction on the LGV Atlantique at Courtalain where the line to Le Mans diverges from the line to Tours, are both fully grade-separated junctions equipped with special high-speed switches (points in British terminology) which permit the normal linespeed of 300 km/h (186 mph) along the direction of the mainline, and a diverging speed of 220 km/h (137 mph).[1].

The French LGV (Lignes à Grande Vitesse) network is large enough to contain four fully grade-separated high-speed triangles: Fretin (near Lille), Coubert (south-east Paris), Massy (south-west Paris) and Angles (Avignon). A fifth triangle, Vémars (north-east Paris) is grade-separated except for a single-track link on the least-commonly used side (southern end linking Paris Gare du Nord to Paris CDG airport).

Examples

Australia
France

(see "LGV Triangles" below)

United Kingdom
United States of America
LGV Triangles

See also

References

External links